Metal Roofing

Below you will find the range of the metal roofing products that we have on offer.

Stramit Speed Deck Ultra

Stramit Speed Deck Ultra

The visual appeal, strength, wide cover, and weather resistance of Stramit Speed Deck Ultra® decking and Stramit Farlap® roof lap joint system make it perfect for all commercial roofing applications. Its excellent strength and ease of assembly allow for long, economical spans. The large water-carrying capacity and weather-tightness permit very low roof pitches, leading to economies in the building structure.

Stramit Speed Deck Ultra® decking may also be used for domestic applications.

Features:

  • Wide Cover
  • Compatible lap joint system available with Stramit FarLap®
    • Allows in-plane long run roofs
    • Provides solution for limited access sites
  • Deep Ribs – stronger and stiffer with better water carrying capacity; roof slopes as low as 1º
  • Full Length Clips – to locate ribs and compress insulation
  • Four Fixing Points Per Clip – with centralised fastening
  • Hexagon Head Screws – bigger, stronger and easier to install, with less wastage
  • Outstanding Wind Load Resistance
  • Spring Curving – data available for arched and curved roofs
  • Automatic Bird Proofing – built in accessory with no need for extra components

Stramit Longspan

Stramit Longspan
The striking linearity, strength, wide cover, light weight and weather resistance of Stramit Longspan® cladding make it perfect for many commercial roofing and walling applications. Its excellent strength and ease of assembly allow for long, economical spans. The water-carrying capacity and weather-tightness permit very low roof pitches, leading to economies in the building structure.

Stramit Longspan® cladding is also used for domestic applications, where a strong but uniform appearance is desired.

Features:

  • 700mm Cover – quick installation and easy handling
  • Easy Fixing – conventional through fixed screws maximise performance and installation
  • Spring Curving – new data for curved roofs available
  • Design Flexibility – long lengths and anti-capillary side laps enable Stramit Longspan® cladding to be used effectively on applications from vertical wall cladding and fascias to roofs with pitch as low as 1.5 degrees
  • Fully Tested – a full range of load performance tables to suit most applications
  • Extended Spans – strength and rigidity of the profile allows economical construction

Stramit Capacityplus

Stramit CapacityPLUS
The drainage capacity, strength, wide cover, light weight and weather resistance of Stramit CapacityPLUS™ cladding make it perfect for large commercial roofing and walling applications. Its excellent strength and ease of assembly allow for long, economical spans. The large water-carrying capacity and weather-tightness permit very low roof pitches, leading to economies in the building structure.

Features:

  • High 50mm ribs – excellent water-carrying capacity at low roof pitch and superior profile rigidity
  • Simple rib shape – enables reliable screw fixing, and easy to trim and notch flashings
  • Wide 810mm cover – fewer sheets enabling fast handling and laying, and cost economy
  • Screw fixed – allows fast and flexible high-wind installation techniques such as ‘tack and screw-off’
  • Range of materials – choice of materials and finishes for enhanced durability options
  • Lowº pitch – building economies due to low wall heights and structure reduction
  • Fully tested – in-house and independent testing for reliable design data and peace-of-mind

Stramit Corrugated

Stramit Corrugated
The soft uniformity of Stramit® Corrugated cladding gives it a unique versatility for architectural applications. Still favoured for traditional styled housing, it is also the first choice for contemporary steel-roofed homes.

Stramit® Corrugated cladding is the most readily curved roofing profile either spring-curved or bullnosed. This has helped to make it popular for smaller commercial applications in both roofing and walling.
Features:

  • Economical – low cost roof and wall cladding
  • Easy Fixing – conventional through fixed screws maximise performance and installation
  • 762mm Cover – quick installation and easy handling
  • 5° Minimum Pitch – to suit most traditional applications
  • Anti-capillary Side Laps
  • Spring Curving – ideal for curved roofs
  • Curving Quality – available in G300 steel for architectural roofs or bullnosing
  • Fully Tested – a full range of load performance tables to suit most applications

Stramit Curved Corrugated

Stramit Curved Corrugated
Stramit® Curved Corrugated steel roofing can be pre-curved to produce a variety of interesting effects that enhance both modern and traditional building designs. Straight sheets can be combined with convex and concave curves to create highly original and aesthetically pleasing roof shapes.

The heritage bullnose veranda is the best-known application of curved corrugated sheeting but by no means the only one. Stramit® Curved Corrugated roofing is also a popular choice on contemporary steel-roofed homes and commercial buildings.

Features:

  • Design flexibility – expands the versatility of traditional corrugated roofing by increasing design options
  • Variety of shapes – can be formed into a wide variety of curved shapes and radii down to a nominal 500mm minimum
  • Easy fixing – conventional through-fixed screws maximise performance and ease of installation
  • 762mm cover – quick installation and easy handling
  • Fully tested – full range of load performance tables to suit most applications

Stramit Monoclad

Stramit Monoclad
Stramit® Curved Corrugated steel roofing can be pre-curved to produce a variety of interesting effects that enhance both modern and traditional building designs. Straight sheets can be combined with convex and concave curves to create highly original and aesthetically pleasing roof shapes.

The heritage bullnose veranda is the best-known application of curved corrugated sheeting but by no means the only one. Stramit® Curved Corrugated roofing is also a popular choice on contemporary steel-roofed homes and commercial buildings.

Features:

  • Design flexibility – expands the versatility of traditional corrugated roofing by increasing design options
  • Variety of shapes – can be formed into a wide variety of curved shapes and radii down to a nominal 500mm minimum
  • Easy fixing – conventional through-fixed screws maximise performance and ease of installation
  • 762mm cover – quick installation and easy handling
  • Fully tested – full range of load performance tables to suit most applications

Stramit Metal Fascia

Stramit Metal Fascia
Stramit Fascia board is an engineered product made from hi-tensile steel. Its simple, elegant lines suit any style of home, from heritage and traditional to the most modern of contemporary designs.

Stramit Roll Top Ridge

Stramit Roll Top Ridge
Stramit® rollformed rainwater products are designed for domestic and light commercial applications, with a comprehensive range of COLORBOND® steel colours to choose from. All products have a wide range of matching accessories.

The extensive range of Stramit® Downpipes provides for the full range of domestic, commercial and most industrial applications. Smaller sizes are available in COLORBOND® steel colours. The full complement of Stramit® Rainwater Products is completed with valley gutter, ridge capping, edge roll, cappings and flashings.

Stramit three break ridge

Three Break Ridge
Stramit® rollformed rainwater products are designed for domestic and light commercial applications, with a comprehensive range of COLORBOND® steel colours to choose from. All products have a wide range of matching accessories.

The extensive range of Stramit® Downpipes provides for the full range of domestic, commercial and most industrial applications. Smaller sizes are available in COLORBOND® steel colours. The full complement of Stramit® Rainwater Products is completed with valley gutter, ridge capping, edge roll, cappings and flashings.

Click here to see the metal roofing that we have on offer.